ION EXCHANGE SYSTEMS (SELECTIVE RESINS)

Selective Ion Exchange is one of the available technology for the targeted recovery of precious metals (Gold, Silver) and Platinum Group Metals (PGM) from process solutions, rinsing waters, or spent baths. By utilizing specialized resins, our systems capture dissolved metal ions with exceptional selectivity, even at low concentrations (trace levels).
This process is a cornerstone of "zero-loss" refining: it acts as a final recovery stage to capture residual value before the solution is sent to the effluent treatment plant (ETP), ensuring no precious metal is wasted; it is essential for recovering Platinum Group Metals (Pt, Pd) that remain in solution after gold precipitation.

KEY POINTS OF ION EXCHANGE:

  • Trace-Level Efficiency: Captures gold and PGM down to the last milligram, reaching concentrations below 1 ppm.

  • Targeted Selectivity: Specialized resins designed to isolate specific metals even in complex or aggressive chemical matrices.

  • Zero-Waste Philosophy: Transforms residual value into tangible profit by eliminating metal loss before final discharge.

Image
Image

THE BALESTRI SOLUTION: Precision and Modularity

The BT-IONEX units are engineered to provide a clear and highly efficient recovery process. The system is designed for maximum flexibility, allowing for configurations with 1 or 2 columns depending on your processing volume and safety requirements.
  • High-Visibility Columns: Borosilicate glass cylinders allow for real-time monitoring of the resin bed and flow consistency.

  • Specific Media: Configurable with different resin types optimized for either acidic or alkaline solutions.

  • Contact time: Integrated diaphragm pumps ensure a constant flow rate, maximizing the contact time between the liquid and the resin for a thorough ion exchange.

OBTAINABLE RESULTS

Maximum Yield from Spent Solutions

The system ensures the most complete and rapid extraction of metal ions. This maximizes value recovery, transforming processing residues into profit.

Sustainability through Recovery

The process captures residual metal ions that would otherwise be lost during effluent discharge. By recovering every milligram of value, the system ensures a "zero-waste" approach, making the final disposal socially and economically responsible while minimizing the environmental footprint of lost resources.

Total Operational Control

Custom configuration ensures full control over electrolytic parameters. This guarantees a stable, repeatable process with consistent results and full traceability for every batch.

EXCLUSIVE FEATURES

Visual Process Monitoring: High-visibility columns allow operators to inspect the resin bed and monitor flow consistency or saturation levels instantly.
Chemical Versatility: Fully compatible with a wide range of selective resins tailored for Gold, Platinum, Palladium, or Rhodium in various chemical matrices.
Modular Configuration: Available in Single-column or Double-column setups. The double-column configuration ensures maximum safety by capturing any potential metal breakthrough from the first unit.
High-Resistance Materials: Built with premium corrosion-resistant components, including borosilicate glass and specialized polymers, to ensure durability in aggressive acidic or alkaline environments.
Direct Resin Access: The assembly is designed to allow the removal of saturated media, which is then prepared for thermal reclamation (ashing) and final melting.

TAILORED FOR YOUR BUSINESS

Refineries & Laboratories

Refineries & Laboratories

To systematically capture Platinum and Palladium from spent aqua regia. This is a mandatory post-gold precipitation step to prevent PGMs from reaching the waste treatment plant as a total financial loss.
Electroplating Industry

Electroplating Industry

For the treatment of rinsing waters and the recovery of precious metals from diluted plating baths.
Jewelry Manufacturers

Jewelry Manufacturers

For the systematic recovery of precious metals from dilute process streams, including rinsing waters from galvanic lines and various chemical surface treatments.
E-Waste Processors

E-Waste Processors

As an essential final stage to "polish" leaching liquors and ensure no precious metal escapes the recycling circuit.
logo tabelle BT-IONEX-01_Resine_1_colonna BT-IONEX-02
Model BT-IONEX-01-A / B BT-IONEX-02-A / B
Configuration 1 High-Visibility Column 2 High-Visibility Columns
Chemistry Version "A" for Acidic / "B" for Alkaline
Media Selection Specific resin type selected based on pH and target metals
Pumping System 1 Diaphragm Pump
Column Material* 1 Borosilicate Glass Column 2 Borosilicate Glass Columns
*Note: Systems with specialized plastic columns are available as custom-engineered solutions upon request.

Tailored for your business

INTERNALIZE RECOVERY

Reduce external processing costs and security risks by transforming your diluted process waste into an internal resource.

TOTAL TRANSPARENCY

The high-visibility glass design eliminates the "black box" approach of traditional ion exchange, allowing you to monitor the resin state and flow consistency at all times.

OPERATIONAL AUTONOMY

A straightforward, robust system that integrates into your existing workflow without requiring advanced chemical expertise for daily operation.

Interested? Contact us for info.


Write an email to:

info@balestritechnologies.com

Call us at:

+39.0575.420.100

Follow us on Facebook:

balestritechnologiessrl

Balestri Technologies S.r.l.
Via Aldo Moro, 9 - 52010
Capolona (AR) Italy
Tel. +39.0575.420.673
Tel./Fax. +39.0575.420.100
e-mail: info@balestritechnologies.com
Certified Email (PEC): balestritechnologies@pec.it
VAT No.: IT 02120540519
REA No.: AR 163232 
Fully paid-up share capital: € 10,000.00 
Single shareholder: NO


BALESTRI TECHNOLOGIES SRL

Project co-financed by the POR FESR 2014-2020 - action 3.1.1 sub a3)
“Aid aimed at containing and countering the COVID-19 epidemiological emergency”
“Tuscany Investment Fund – investment aid”

Project Title: “INNOVAZIONE 2020”

The project relates to extraordinary renovation works of the workplace, with specific focus on the creation of new offices and conference rooms designed to counter the spread of the Covid-19 virus and resume work activities in full safety. In particular, the conference room, equipped for remote webcam connection, has boosted after-sales and technical assistance activities in complete safety, allowing for remote support during the installation and training phases of machinery purchased by our customers both in Italy and abroad.